Ottozeus Beratungsforum

Dear,

I use Ruderer L530 glue to bond PMMA/Acrylic with PVC, this works fine but the handling time is a bit to short.

The adhesive surface is about 250 square centimeter, the L530 Ruderer glue is almost dry when I try to glue these surfaces.
Are there any good alternatives for bonding these materials, preferably an adhesive that cures rapidly less.

Thanks in advance for any reaction!

Hallo,

please use our servicetable and search for on perfect adhesive for your working.

http://www.ottozeus.de/ottozeus/nach-material.html

Your Ottozeus-Team

I have looked at a other part of the website:
http://www.ottozeus.de/produkte/material-1-11-21-26-15.html

There I have selected the materials and it gives a few suggestions. By one of the glues the remark "dauerklebrig is mentioned. Was does this mean? As I understand it the glue stays sticky?

"dauerklebrig" is like the adhesive site a tape (Scotch or Tesa). The adhesive ist not strong, you can remove.

Do you need on adhesive clear or not clear?

Dauerklebrig isn't what I'm looking for then. I'm searching for a glue which cures to a solid bond.

Clear is preferred, and slightly filling ability should be nice as well.
The RUDERER 4000 P1 or RUDERER U 56 seems interesting, any experience with these glues used on PMMA and PVC?

this glues are not clear.
technicoll 9403, a 2-component-glue makes a clear bonding.
http://www.ottozeus.de/ottozeus/nach-anwendung/hochtemperatur/technicollr-9403-mma.html

The curing time for the glue you name is a bit to short for me I'm afraid. I need to check all the advised glues to see which one suits my demand best.

sorry,
Ottozeus has no other clear glues. Please look here:
http://acrifix.evonik.de/sites/dc/Downloadcenter/Evonik/Product/ACRIFIX/de/191-1%20ACRIFIX%C2%AE_de.pdf

I will get in contact with the sales department because I think it is wise to try some glues.

Thanks for the advice.